DELL PC6248 User Manual
Multicast Commands
829
ip mcast boundary
Use the ip mcast boundary command in Interface Configuration mode to
add an administrative scope multicast boundary specified by
groupipaddr and
mask for which this multicast administrative boundary is applicable.
groupipaddr is a group IP address and mask is a group IP mask.
Syntax
ip mcast boundary
groupipaddr mask
no ip mcast boundary
groupipaddr mask
•
groupipaddr — IP address of multicast group. Valid range is 239.0.0.0 to
239.255.255.255.
•
mask — IP mask of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example adds an administrative scope multicast boundary.
console(config)#interface vlan 15
console(config-if-vlan15)#ip mcast boundary 239.5.5.5
255.255.255.255
ip mroute
Use the ip mroute command to create a static multicast route for a source
range. Use the "no" form of this command to delete a static multicast route.