Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. PC6248
  5. User Manual

DELL PC6248 User Manual

Download
Page of 1356
838
Multicast Commands
Default Configuration
There are no static RP addresses configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pimsm rp-address 192.168.20.1 225.1.0.0 
255.255.255.0
ip pimsm rp-candidate
The ip pimsm rp-candidate command is used to configure the router to 
advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap 
router (BSR). Use the “no” form of this command to disable the router to 
advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap 
router (BSR). This command deprecates the ip pimsm crppreference 
command.
Syntax
ip pimsm rp-candidate vlan 
vlanid group-address group-mask
ip pimsm rp-candidate vlan 
vlanid 
•
vlanid — A valid VLAN ID.
•
group-address — Group IP address supported by RP.
•
group-mask — Group subnet mask for group address.
Default Configuration
The router does not advertise itself as a PIM candidate rendezvous point by 
default.
Command Mode
Global Configuration mode