Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. S50V
  5. User Manual

DELL S50V User Manual

Download
Page of 1262
1046
|
Broadcast Storm Control
www.dell.com | support.dell.com
Multicast Storm Control
c s
Storm Control Show Commands
The 
show storm-control
 commands display the current storm control configuration of the entire Dell 
Force10 platform. These show commands are accessed from within either the EXEC or EXEC 
Privilege 
mode
, and consist of the following three commands: 
•
show storm-control broadcast
•
show storm-control multicast
•
show storm-control unknown-unicast
These show commands can be entered with or without the interface option. Without the interface option, 
storm control configuration information for the entire Dell Force10 platform is displayed. 
To display the storm control configuration of a particular interface, use the interface option along with the 
interface-type keyword and the slot and port information. 
The following is a list of the interface-type keywords:
•
Fastethernet
 — for a fast Ethernet interface
•
GigabitEthernet
 — for a 1-Gigabit Ethernet interface
•
TenGigabitEthernet 
— for a 10-Gigabit Ethernet interface
The following example uses the 
show storm-control broadcast
 command to display the storm control 
configuration on a Gigabit Ethernet interface on port 11, in slot 11 of an E-
Series platform
.
Task
Command Syntax
Command Mode
On the E-Series, suppress unknown-unicast packets if 
they exceed a user-defined limit.
storm-control unknown-unicast 
percentage partial-percentage 
[
in
 | 
out
]
CONFIGURATION
On the C-Series and S-Series, unknown-unicast packets 
on ingress if they exceed a user-defined limit.
storm-control unknown-unicast 
packets-per-second 
in
CONFIGURATION
Task
Command Syntax
Command Mode
Suppress multicast packets if they exceed a user-defined 
limit.
storm-control multicast 
packets-per-second 
in
CONFIGURATION