DELL S50V User Manual

Page of 1262
Content Addressable Memory | 287
Figure 11-1.  EF Line Card with EG Chassis Profile—Card Problem
Figure 11-2.  EH Line Card with EG Chassis Profile—Card Problem
When to Use CAM Profiling
The CAM profiling feature enables you to partition the CAM to best suit your application. For example:
Configure more Layer 2 FIB entries when the system is deployed as a switch.
Configure more Layer 3 FIB entries when the system is deployed as a router.
Configure more ACLs (when IPv6 is not employed).
Hash based on bidirectional flow for LAGs. See 
.
Message 2  EH Line Card with EG Chassis Profile Error
# Before reload:
01:09:56: %RPM0-P:CP %CHMGR-4-EH_PROFILE_WARN: If EH CAM profile is selected, non-EJ cards 
will be in problem state after reload
# After reload:
00:04:46: %RPM0-P:CP %CHMGR-3-PROFILE_MISMATCH: Mismatch: line card 1 has mismatch CAM 
profile or microcode
R1#show linecard 1 brief
--  Line card 1 --
Status        : card problem - mismatch cam profile
Next Boot     : online
Required Type : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 interfaces (EF)
Current Type  : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 interfaces (EF)
Hardware Rev  : Base  - 1.1  PP0 - 1.1  PP1 - 1.1
Num Ports     : 48
Up Time       : 0 sec
FTOS Version  : 7.6.1.0
Jumbo Capable : yes
R1#show linecard 1 brief
--  Line card 1 --
Status        : card problem - mismatch cam profile
Next Boot     : online
Required Type : E90MH - 90-port 10/100/1000Base-T line card with mini RJ-21 interfaces (EH)
Current Type  : E90MH - 90-port 10/100/1000Base-T line card with mini RJ-21 interfaces (EH)
Hardware Rev  : Base  - 0.3 PP0 - 1.1  PP0 - PP1 - 
Num Ports     : 90
Up Time       : 0 sec
FTOS Version  : 8.1.1.0
Jumbo Capable : yes