Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. S50V
  5. User Manual

DELL S50V User Manual

Download
Page of 1262
354
|
Force10 Service Agent
www.dell.com | support.dell.com
Set the Frequency of FTSA Type 3 Messages
When messaging is enabled, FTSA sends an E-mail every 24 hours containing inventory information to all 
recipients. There is no facility for setting the frequency for individual recipients.
Generate FTSA Type 4 Messages
FTSA can collect and E-mail a user-defined subset of the local system log.These E-mails are Type 4, and 
Type 4 messages are enabled by default:
After the initial message, subsequent messages only include log entries with that were generated after the 
last message was sent to the server so that log messages are not repeated in multiple E-mails.
Set Parameters FTSA Type 5 Messages
FTSA Type 5 messages have two configurable parameters:
Task
Command
Command Mode
Set the frequency at which FTSA generates 
inventory E-mails.
Range: 2 to 10080 minutes
Default: 1440 minutes (24 hours)
frequency 
minutes
CALLHOME
Step
Task
Command
Command Mode
1
Ensure that system logging is on, 
and verify the logging severity 
level.
logging on
do show running-config logging
CONFIGURATION
2
Collect and E-mail system log 
messages. 
•
If you do not use the 
severity
 
option, FTSA uses 7 by default.
•
This is the recommended 
severity level. Lower values 
will result in partial log data 
sent to the server because 
messages with higher values 
are filtered out. 
log-messages
 
[
delay 
minutes
] 
[
severity 
level
] [
filter 
string
]
CONFIGURATION<SERVER>
Task
Command
Command Mode
Divert Type 5 messages to the internal flash 
directory /CALL-HOME-LOGS instead of sending 
them to FTSA recipients. Filenames include the 
action list name and a timestamp, and use the file 
extension .ftsa.
log-only
CALLHOME ACTIONLIST