DELL S50V User Manual
496
|
IPv6 Addressing
www.dell.com | support.dell.com
Configuration Task List for IPv6
This section contains information regarding the following:
•
•
•
•
•
•
•
•
Change your CAM-Profile on an E-Series system
The cam-profile command is supported only on platform
e
Change your CAM profile to the CAM
ipv6-extacl
before doing any further IPv6 configuration. Once the
CAM profile is changed, save the configuration and reboot your router.
for complete information regarding CAM configuration.
Figure 22-4. Command Example:
show cam-profile summary
(E-Series)
Command Syntax
Command Mode
Purpose
cam-profile ipv6-extacl
microcode ipv6-extacl
microcode ipv6-extacl
chassis
| linecard slot
EXEC Privileged
Enable the CAM profile with IPv6 extended ACLs
on the entire chassis or on a specific linecard
on the entire chassis or on a specific linecard
chassis
changes the CAM profile for all linecards
in the chassis
linecard slot/port changes the CAM profile only
for the specified slot
linecard slot/port changes the CAM profile only
for the specified slot
FTOS#show cam-profile summary
-- Chassis CAM Profile --
: Current Settings : Next Boot
Profile Name : IPV6-ExtACL : IPV6-ExtACL
MicroCode Name : IPv6-ExtACL : IPv6-ExtACL
-- Line card 1 --
: Current Settings : Next Boot
Profile Name : IPV6-ExtACL : IPV6-ExtACL
MicroCode Name : IPv6-ExtACL : IPv6-ExtACL
FTOS#