DELL S50V User Manual

Security | 947

To view all configured Trace lists and the number of packets processed through the Trace list, use the 

command 

(Figure 110)

 in the EXEC Privilege mode.

Apply trace lists 

After you create a Trace list, you must enable it. Without enabling the Trace list, no traffic is filtered. 

You can enable one Trace list.

To enable a Trace list, use the following command in the CONFIGURATION mode: 

To remove a Trace list, use the 

 

 command syntax.

Once the Trace list is enabled, you can view its log with the 

 

[

 

] command. 

 

CONFIGURATION

Enable a configured Trace list to filter traffic.

FTOS(config-trace-acl)#deny tcp host 123.55.34.0 any

FTOS(config-trace-acl)#permit udp 154.44.123.34 0.0.255.255 host 34.6.0.0

FTOS(config-trace-acl)#show config

!

ip trace-list nimule

 seq 5 deny tcp host 123.55.34.0 any

 seq 10 permit udp 154.44.0.0 0.0.255.255 host 34.6.0.0

FTOS#show ip accounting trace-list dilling 

Trace List dilling on linecard 0

 seq 2 permit ip host 10.1.0.0 any count (0 packets)

 seq 5 deny ip any any

FTOS#