DELL 200S User Manual
3-4
Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems Installation and Service Guide
3.
Align the stabilizers with the screw holes and attach the stabilizers to the chassis
using a Phillips-head screwdriver and four 6-32 x 1/2-inch hex-head screws (see
Figure 3-3).
using a Phillips-head screwdriver and four 6-32 x 1/2-inch hex-head screws (see
Figure 3-3).
#$%
1.
Place the stand-alone chassis in an upright position.
2.
Carefully place the front of the storage system into the back of the stand-alone
chassis.
chassis.
The top hat flange on the storage system aligns with the top hat bracket in the
enclosure. The bottom hat flange on the storage system aligns with the bottom
hat bracket in the enclosure (see Figure 3-4).
enclosure. The bottom hat flange on the storage system aligns with the bottom
hat bracket in the enclosure (see Figure 3-4).
1
Bottom of stand-alone chassis
2
Stabilizers (2)