D-Link DES-3225GF User Manual

Page of 219
24-port NWay Ethernet Switch User’s Guide
Introduction
5
 
All ports can auto-negotiate (NWay) between 10Mbps/
100Mbps, half-duplex or full duplex and flow control.
 
One rear  panel slide-in  module  interface  for  a  1-port
1000BASE-SX Gigabit Ethernet module for
connecting to another switch.
 
One slide-in module interface in the front panel for 1
or 2 port 10/100M Ethernet connection. Three
modules are available: 2 ports TX module, 2 ports FX
MT-RJ type module, and 1 port FX SC type module.
 
RS-232 DCE Diagnostic port (console port) for setting
up  and  managing  the  Switch  via  a  connection to a
console terminal or PC using a terminal emulation
program.
Performance features
 
Store and forward switching scheme capability to
support rate adaptation and protocol conversion.
 
Full and half-duplex for both 10Mbps and 100Mbps
connections. The 1000BASE-SX Gigabit Ethernet
module operates at full-duplex only. Full-duplex
allows the switch port to simultaneously transmit
and receive data, and only works with connections to
full-duplex capable end stations and switches.
Connections to hubs must take place at half-duplex.
 
Auto-polarity detection and correction of incorrect
polarity on the receive twisted-pair at each port.
 
Data forwarding rate 14,880pps per port at 100% of
wire-speed for 10Mbps speed.