D-Link DFE-2600 User Manual
Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management
58
hh:mm:ss.xx, with hh representing hours since the master hub was
turned on, mm the minutes, ss the seconds, and xx representing 100ths
of a second.
turned on, mm the minutes, ss the seconds, and xx representing 100ths
of a second.
♦
Group Slot (1). Shows the status of module slot 1. If there is a mod-
ule installed in slot 1, this field will display: MII, TP, FX, or Switch as
determined by the type of module installed. If there is no module in-
stalled, the field will display
ule installed in slot 1, this field will display: MII, TP, FX, or Switch as
determined by the type of module installed. If there is no module in-
stalled, the field will display
one.”
♦
Group Slot (2). Shows the status of module slot 2. If there is a mod-
ule installed in slot 2, this field will display: MII, TP, FX, or Switch as
determined by the type of module installed. If there is no module in-
stalled, the field will display
ule installed in slot 2, this field will display: MII, TP, FX, or Switch as
determined by the type of module installed. If there is no module in-
stalled, the field will display
one.”
♦
Group Isolate. Provides control of the hub
current network con-
nection status and allows the system manager to manually isolate a
particular hub as needed and reconnect it later. Toggling the field to
particular hub as needed and reconnect it later. Toggling the field to
solate” separates the hub
data connection from the other hubs.
Toggling the field to
econnect” re-establishes the connection. See
egmenting Hubs” earlier in this chapter for more information.
DFE-2600 Stackable Hub - Network Monitoring : Group Configuration Menu
Group ID (1-5)
[1]
Group Serial Number:
623000B
Group Position Number:
Group Description:
Group Description:
DFE2624i
Group Role:
Primary Master
Group Port Capacity:
24
Group Hardware Revision:
Rev. 06
Group Master Revision:
Rev. 01
Group Status:
Up
Group Last Oper Change:
0:1:35.90
Group Slot (1):
Switch
Group Slot (2):
none
Group Isolate:
<Reconnect>
PREV GROUP
NEXT GROUP
HELP
SAVE
EXIT