DELL 3324 User Manual

272

C o n f i g u r i n g   S w i t c h   I n f o r m a t i o n

www

.dell.com | support.dell.com

The following is an example of the CLI commands: 

Console (config)# gvrp enable

Console (config)# interface ethernet 1/e8

Console (config-if)# gvrp enable

Console (config-if)# gvrp-vlan-creation-forbid

Console (config-if)# gvrp registration-forbid

Console# show gvrp configuration

GVRP Feature is currently enabled on the switch.

Maximum VLANs: 256, Maximum VLANs after reset: 256.

Port(s)StatusRegistrationDynamic VLANTimers (milliseconds)

CreationJoinLeaveLeave All

----------------------------------------------

2/1EnabledNormalEnabled20060010000

4/4EnabledNormalEnabled20060010000

Aggregating Ports 

Port Aggregation optimizes port usage by linking a group of ports together to form a single 
Link Aggregated Group (LAG). Port Aggregation multiplies the bandwidth between the 
devices, increases port flexibility, and provides link redundancy. Both the PowerConnect 
3324 and PowerConnect 3348 support up to six LAGs, and eight ports per LAG per stack or 
stand-alone unit.

Each LAG is composed of ports of the same speed, set to full-duplex operations. Ports in a 
LAG, can be of different media types (UTP/Fiber, or different fiber types), provided they 
operate at the same speed.

show gvrp configuration 
[ethernet interface | port-
channel 

]

Displays GVRP configuration 
information, including timer values, 
whether GVRP and dynamic VLAN 
creation is enabled, and which ports are 
running GVRP.

gvrp max-vlan number

Configures the maximum number of 
VLANs when GVRP is enabled. 

CLI Command

Description