DELL 6024 User Manual
144
Configuring System Information
www
.dell.com | support.dell.com
Defining IP Interfaces
The IP Interface Parameters page contains parameters for assigning IP addresses to interfaces.
To open the IP Interface Parameters page, click System
To open the IP Interface Parameters page, click System
→
IP Addressing
→
Interface Parameters in
the tree view.
Figure 6-24.
IP Interface Parameters
The IP Interface Parameters page contains the following fields:
IP Address — The interface IP address.
Prefix Length — The number of bits that comprise the source IP address prefix, or the network
mask of the source IP address.
Interface — The interface type for which the IP address is defined. The possible field values are
Port, LAG, or VLAN.
For information about configuring Link Aggregated Groups (LAGs), see "Aggregating Ports." For
information about configuring VLANs, see "Configuring VLANs."
Type — Indicates whether or not the IP address was configured statically.
Forward Directed IP Broadcasts — Enables the translation of a directed broadcast to physical
broadcasts. Disabling drops IP-directed broadcasts and does not forward them.
Broadcast Type — Defines an interface broadcast address.
IP Address — The interface IP address.
Prefix Length — The number of bits that comprise the source IP address prefix, or the network
mask of the source IP address.
Interface — The interface type for which the IP address is defined. The possible field values are
Port, LAG, or VLAN.
For information about configuring Link Aggregated Groups (LAGs), see "Aggregating Ports." For
information about configuring VLANs, see "Configuring VLANs."
Type — Indicates whether or not the IP address was configured statically.
Forward Directed IP Broadcasts — Enables the translation of a directed broadcast to physical
broadcasts. Disabling drops IP-directed broadcasts and does not forward them.
Broadcast Type — Defines an interface broadcast address.
One Fill indicates the interface broadcast address is one fill (255.255.255.255).
Zero Fill indicates the interface broadcast address is zero fill (0.0.0.0).