DELL 6024 User Manual
240
Configuring Switch Information
www
.dell.com | support.dell.com
Status — The host status. The possible field values are:
Unauthorized — Indicates that the port control is Force Unauthorized, the port link is down
or the port control is Auto, but a client has not been authenticated via the port.
or the port control is Auto, but a client has not been authenticated via the port.
Not in auto mode — Indicates that the port control is Forced Authorized, and clients have full
port access.
port access.
Single-host Lock — Indicates that the port control is Auto and a single client has been
authenticated via the port.
authenticated via the port.
No Single Host — Indicates that Multiple Host is enabled.
Number of Violations — The number of packets that arrived on the interface in single-host mode,
from a host whose MAC address is not the client (supplicant) MAC address.
from a host whose MAC address is not the client (supplicant) MAC address.
1
Open the Multiple Hosts page.
2
Click Show All.
The Multiple Hosts Table opens.
The Multiple Hosts Table opens.
Figure 7-4.
Multiple Hosts Table
Enabling Multiple Hosts Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the advanced port
based authentication as displayed in the Multiple Hosts page.
based authentication as displayed in the Multiple Hosts page.
Table 7-2.
Multiple Hosts CLI Commands
CLI Command
Description
dot1x multiple-hosts
Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.
authorized port that has the dot1x port-control
interface configuration command set to auto.