DELL 6024 User Manual
Configuring Switch Information
247
Wild Card Mask — The Destination IP address wildcard mask. Select either Match DSCP or
Match IP Precedence:
Match IP Precedence:
Match DSCP — Matches the packet DSCP value to the ACE. Either the DSCP value or the
IP Precedence value is used to match packets to ACLs.
IP Precedence value is used to match packets to ACLs.
Match IP Precedence — Matches the packet IP Precedence value to the ACE. Either the
DSCP value or the IP Precedence value is used to match packets to ACLs.
DSCP value or the IP Precedence value is used to match packets to ACLs.
Action — The ACL forwarding action. Possible values are:
Permit — Forwards packets which meet the ACL criteria.
Deny — Drops packets which meet the ACL criteria.
Shutdown — Drops packet that meets the ACL criteria, and disables the port to which the
packet was addressed. Ports are reactivated from the Ports Configuration page, see "Defining
Port Configuration."
packet was addressed. Ports are reactivated from the Ports Configuration page, see "Defining
Port Configuration."
To see all the ACEs attached to the ACE, click Show All.
Adding an IP based ACL
1
Open the Add ACE to IP Based ACL page.
2
Click Add to display the Add IP Based ACL page.
Figure 7-9.
Add IP Based ACL
3
Enter the ACL Name.
4
Check the New ACE Priority check box and define all of the fields in the page.
5
Click Apply Changes.
The IP based ACL is defined, and the device is updated.
The IP based ACL is defined, and the device is updated.