DELL 6024 User Manual
Configuring Switch Information
271
Adding a Static MAC Address
1
Open the Static MAC Address page.
2
Click Add to display the Add Static MAC Address page.
3
Complete the fields.
4
Click Apply Changes.
The new static address is added to the Static MAC Address Table, and the device is updated.
The new static address is added to the Static MAC Address Table, and the device is updated.
Modifying a Static Address in the Static MAC Address Table
1
Open the Static MAC Address page.
2
Modify the fields.
3
Click Apply Changes.
The static MAC address is modified, and the device is updated.
The static MAC address is modified, and the device is updated.
Removing a Static Address from the Static Address Table
1
Open the Static MAC Address page.
2
Click Show All to display the Static MAC Address Table.
3
Select a table entry.
4
Check the Remove check box.
5
Click Apply Changes.
The static address is deleted, and the device is updated.
The static address is deleted, and the device is updated.
Configuring Static Address Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring static address
parameters as displayed in the Static MAC Address Page.
parameters as displayed in the Static MAC Address Page.
Table 7-12.
Static Address CLI Commands
CLI Command
Description
bridge address mac-address
{ethernet
interface
| port-
channel
port-channel-
number
} [permanent |
delete-on-reset | delete-
on-timeout | secure]
Adds a static MAC-layer station source
address to the bridge table.
address to the bridge table.