DELL 6024 User Manual
284
Configuring Switch Information
www
.dell.com | support.dell.com
Defining STP Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port parameters
as displayed in the STP Port Settings page.
as displayed in the STP Port Settings page.
The following is an example of the CLI commands:
Console(config)#
interface ethernet
g5
Console(config-if)#
spanning-tree disable
Console(config-if)#
spanning-tree cost
35000
Console(config-if)#
spanning-tree port-priority
96
Console(config-if)#
spanning-tree portfast
Console(config-if)#
exit
Console(config)#
exit
Console#
show spanning-tree ethernet
g1
Spanning tree enabled
Type: point-to-point (configured
: auto)
Table 7-16.
STP Port Settings CLI Commands
CLI Command
Description
spanning-tree disable
Disables spanning tree on a specific
port.
port.
spanning-tree cost
cost
Configures the spanning tree path cost
for a port.
for a port.
spanning-tree port-priority
priority
Configures port priority.
show spanning-tree [ethernet
interface | port-channel
port-channel-number
]
Displays spanning tree configuration.
spanning-tree portfast
Enables PortFast mode.
Interface Port ID Designated
Port ID
Name Prio.Nbr
Cost
Sts
Cost Bridge ID
Prio.Nbr
--------
------- --- -- -------------------- ------
g1
128.1
19
FWD
38 32768 0030.9441.62c1 128.25