DELL 6024 User Manual
316
Configuring Switch Information
www
.dell.com | support.dell.com
Figure 7-35.
LAG Membership Page
LACP — Aggregates the port to a LAG, using LACP.
LAG — Adds a port to a LAG, and indicates the specific LAG to which the port belongs.
LAG — Adds a port to a LAG, and indicates the specific LAG to which the port belongs.
Adding a Port to a LAG
1
Open the LAG Membership page.
2
Toggle the button under the port number to assign the static setting and the LAG number.
3
Toggle the button in the LACP row to L to aggregate the port to a LAG with LACP
4
Click Apply Changes.
The port is added to the LAG, and the device is updated.
The port is added to the LAG, and the device is updated.
Assigning Ports to LAGs Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to LAGs as
displayed in the LAG Membership page.
displayed in the LAG Membership page.
Table 7-30.
LAG Membership CLI Commands
CLI Command
Description
interface port-channel
port-channel-number
Enters the interface configuration mode of a
specific port-channel.
specific port-channel.
channel-group
port-
channel-number
mode
{on | auto}
Associates a port with a port-channel. Use the
no form of this command to remove the
channel-group configuration from the
interface
no form of this command to remove the
channel-group configuration from the
interface