DELL 6024 User Manual
Configuring Routing
383
Figure 8-26.
DVMRP Next Hop Table
Source IP Address — Source IP address for the next hop of an outgoing interface.
Source Mask — Source mask for the next hop of an outgoing interface.
Downstream Interface — The next hop’s outgoing interface.
Type — Specifies the next hop type. Possible values are:
Source Mask — Source mask for the next hop of an outgoing interface.
Downstream Interface — The next hop’s outgoing interface.
Type — Specifies the next hop type. Possible values are:
Branch — Indicates that there is another hop after this hop.
Leaf — Indicates that this is the route’s last hop.
Viewing the DVMRP Next Hop Table Using CLI Commands
The following table contains the CLI command for viewing the DVMRP Next Hop Table.
The following is an example of the CLI command:
Console> show ip dvmrp next-hop
Source Interface Hop Type
--------------------------- ----------
198.92.37.100/32 eth g2 Leaf
Table 8-22.
DVMRP Next Hop Table CLI Commands
CLI Command
Description
show ip dvmrp next-hop
[ethernet
interface-number
|
vlan
vlan-id
| port-channel
number
]
Shows the DVMRP Next Hop table.