DELL 6024 User Manual

Page of 474
386
Configuring Routing
www
.dell.com | support.dell.com
Source Mask — Masks all or parts of the source IP address.
Upstream Neighbor — IP address of the next upstream device from which packets to the IP 
address are received.
Upstream Interface — Port number to which multicast packets being sent are received.
Up Time — Indicates the time lapse since the router learned the multicast information.
Protocol — Identifies the type of protocol used to learn the multicast information. For this project, 
the only possible value is DVMRP, which indicates that the Distance Vector Multicast Routing 
Protocol was used to learn the multicast information.
Displaying IP Multicast Routing Table Using CLI Commands 
The following table contains the CLI commands for viewing the IP Multicast Routing Table.
The following is an example of the CLI commands: 
Console> show ip mroute
Group   Source  Upstream  Interface Up TimeExpiry Time Owner
------------------------------------------------------
224.0.255.1198.92.37.100/3210.20.37.33 eth g1 20:20:000:02:55dvmrp
224.0.255.1199.92.37.100/3210.20.37.33 eth g1 1d:4h:20m0:02:55dvmrp
224.1.255.1198.92.37.100/3210.20.37.33 eth g1 21:20:000:02:55dvmrp
224.1.255.1199.92.37.100/3210.20.37.33 eth g1 1d:5h:20m0:02:55dvmrp
224.8.255.1179.82.17.200/3210.20.37.33 vlan 127 1w:1d:2h0:02:55dvmrp
224.8.255.1179.82.17.200/3210.20.37.33 vlan 1283m:2w:2d0:02:55dvmrp
224.8.255.1179.82.17.200/3210.20.37.33 vlan 1291y:2m:2w0:02:55dvmrp
224.9.255.1179.82.17.200/3210.20.37.33p-c 71d:5h:20m0:02:55dvmrp
Table 8-24.
IP Multicast Routing Table CLI Commands
CLI Command
Description
show ip mroute [group 
group-address
] [source 
source-address
] [ethernet 
interface-number
 | 
vlan 
vlan-id
 | 
port-channel 
number
]
Displays the IP multicast routing table 
contents.