DELL 6024 User Manual
Configuring Quality of Service
433
3
Select an interface from which to copy port bandwidth settings to all or any of the interfaces
listed in the Port Bandwidth Settings Table.
listed in the Port Bandwidth Settings Table.
4
Check the Copy to check box for each interface to which the port bandwidth settings should
be copied, or click Select All to copy the port bandwidth settings to all listed interfaces.
be copied, or click Select All to copy the port bandwidth settings to all listed interfaces.
5
Click Apply Changes.
Defining Bandwidth Settings Using the CLI Commands
The following is an example of the CLI commands:
Console(config)# interface ethernet g5
Console(config-if)# traffic-shape 124000 96000
Console(config-if)# wrr-queue bandwidth 1 2 3 4 5 6 7 8
Console(config-if)# exit
Console(config)# priority-queue out num-of-queues 2
Console(config)# exit
Console> show qos interface ethernet g1 buffers
Ethernet g1
Notify Q depth:
qid-size
Table 10-4.
Bandwidth Setting CLI Commands
CLI Command
Description
traffic-shape {
committed-
rate committed-burst
}
[
queue-id
]
Sets shaper on egress port or queue.
wrr-queue bandwidth
weight1 weight2 ...
weight_n
Assigns Weighted Round Robin (WRR)
weights to egress queues.
weights to egress queues.
priority-queue out num-
of-queues
number-of-
queues
Configures the number of strict priority
queues.
queues.
show qos interface
[ethernet
interface-
number
| vlan
vlan-id
|
port-channel
number
]
[buffers | queuing |
policers | shapers]
Displays the QoS interface information.