DELL 6024 User Manual
Configuring Quality of Service
437
Defining CoS to Queue Mapping
The CoS to Queue Mapping Table page enables mapping CoS values to specific queues. To open
the page, click Quality of Service
the page, click Quality of Service
→ QoS Global Parameters→ CoS to Queue in the tree view.
Figure 10-6.
CoS to Queue Mapping Table Page
Class of Service — The 802.1Q VLAN priority tag in the incoming packet.
Queue — Maps the CoS to the selected queue. The possible values for the queue are 1-8.
Incoming packets with the specified CoS value are mapped to the defined queue, if Trust was
enabled for CoS.
Restore Defaults — Restores all queues to the default class of service settings.
Queue — Maps the CoS to the selected queue. The possible values for the queue are 1-8.
Incoming packets with the specified CoS value are mapped to the defined queue, if Trust was
enabled for CoS.
Restore Defaults — Restores all queues to the default class of service settings.
Mapping CoS to Queues
1
Open the CoS to Queue Mapping Table page.
2
Select a queue for each Class of Service entry.
3
Click Apply Changes.
CoS is mapped to queues, and the device is updated.
CoS is mapped to queues, and the device is updated.
Resetting CoS Mapping to the Default Queues:
1
Open the CoS to Queue Mapping Table page.
2
Check Restore Defaults.
3
Click Apply Changes.