DELL 6024 User Manual

Configuring Quality of Service

445

Removing UDP to Queue Mapping 

1

Open the UDP to Queue page.

2

Click Show All to display the UDP to Queue Mapping Table page.

3

Click Remove for each of the UDP ports for which queue mapping should be removed.

4

Click Apply Changes. 

Defining UDP to Queue Mapping Using the CLI Commands

The following is an example of the CLI commands: 

console(config)# qos map udp-port-queue 68 to 1

console(config)# exit

console# show qos map udp-port-queue

Udp port-queue map:

Port queue

----- -----

8000  1

8001  2

Configuring Basic QoS Mode

The Basic QoS Mode page contains links to QoS pages on which Trust Mode and DSCP Rewriting 
are configured. To open the Basic QoS Mode page, click Quality of Service

→ Basic QoS Mode in 

the tree view. 

Table 10-8.

UDP to Queue Mapping CLI Commands

CLI Command

Description

qos map udp-port-queue 

port1 ... port 8 to queue-

id

Modifies the UDP-Port to 
queue. 

show qos map [dscp-queue | 

tcp-port-queue | udp-port-

queue | dscp-policed | 

dscp-mutation]

Displays all the QoS maps.