DELL 6024 User Manual
Configuring System Information
101
Defining System Information
1
Open the Asset page.
2
Define the following fields: System Name, System Contact, System Location, and Asset Tag.
3
Click Apply Changes.
The system parameters are applied, and the device is updated.
The system parameters are applied, and the device is updated.
Initiating a Telnet Session
1
Open the Asset page.
NOTE:
The appropriate telnet parameters are set prior to initiating the telnet session. See "Configuring
an Initial Telnet Password" for information.
2
Click Telnet.
Configuring Device Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Asset page.
Asset page.
Table 6-1.
Asset CLI Commands
CLI Command
Description
hostname name
Specifies or modifies the device host name.
snmp-server contact
text
Sets up a system contact.
snmp-server location
text
Specifies information about where the device is
located.
located.
show clock
Displays the time and date from the system
clock.
clock.
asset-tag tag
Specifies the asset tag for the device.
show system-id
Displays the system ID information, including
service tag, asset tag, and serial number.
service tag, asset tag, and serial number.
show system
Displays system information.