DAXTEN DSR1020 User Manual

 Chapter 3: Local Port Operation        35

4. Click OK to disconnect the user and return to the User Status dialog box.

-or-
Click X or press 

 to exit the dialog box without disconnecting a user.

NOTE: If the User Status list has changed since it was last displayed, the mouse cursor will turn into an 
hourglass as the list is automatically updated. No mouse or keyboard input will be accepted until the list update 
is complete. 

NOTE: This function is for Microsoft Windows-based computers only. Resetting the PS/2 on a target device 
running any other operating system may require that you reboot that target device. 

If your PS/2 keyboard or mouse locks up, you may be able to re-establish operation of these peripherals 
by issuing a Reset command. The Reset command sends a hot-plug sequence to the target device which 
causes the mouse and keyboard settings to be sent to the DSR switch. With communication re-
established between the target device and the DSR switch, functionality is restored to the user.

1. If the OSCAR interface is not open, press 

. The Main dialog box will appear.

2. Click Commands - Reset PS/2. A message box displays requesting that you confirm the reset. 

Click OK.
a. A message appears indicating that the mouse and keyboard have been reset. 
b. Click X to close the message box.

-or-