Nortel Networks BMD00007 User Manual
Alteon OS Command Reference
The Configuration Menu
213
BMD00007, November 2007
/cfg/port
<port alias or number>
Port Configuration
Use the Port Configuration menu to configure settings for individual switch ports, except the
management port (MGT). This command is enabled by default.
management port (MGT). This command is enabled by default.
[Port INT1 Menu]
gig - Gig Phy Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
dscpmrk - Enable/disable DSCP remarking for port
learn - Enable/Disable FDB Learning for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
fastfwd - Enable/disable Port Fast Forwarding mode
floodblk - Enable/disable Port flood blocking
ena - Enable port
dis - Disable port
cur - Display current port configuration
Table 6-25 Port Configuration Menu (/cfg/port)
Command Syntax and Usage
gig
If a port is configured to support Gigabit Ethernet, this option displays the Gigabit Ethernet Physi-
cal Link Menu. To view menu options, see
cal Link Menu. To view menu options, see
aclqos
Displays the ACL Quality of Service Menu. To view menu options, see
.
8021ppri
<0-7>
Configures the port’s 802.1p priority level.
pvid
<VLAN number, 1-4095>
Sets the default VLAN number which will be used to forward frames which are not VLAN tagged.
The default number is 1 for non-management ports.
The default number is 1 for non-management ports.
name
<64 character string>|none
Sets a name for the port. The assigned port name appears next to the port number on some infor-
mation and statistics screens. The default is set to None.
mation and statistics screens. The default is set to None.
dscpmark
Enables or disables DSCP re-marking on a port.