Nortel Networks BMD00007 User Manual
Alteon OS Command Reference
The Configuration Menu
223
BMD00007, November 2007
/cfg/l2/8021x/port <
alias or number>
802.1x Port Configuration
The 802.1x port menu allows you to configure parameters that affect the selected port in the
GbESM. These settings override the global 802.1x parameters.
GbESM. These settings override the global 802.1x parameters.
[802.1x Port Configuration Menu]
mode - Set access control mode
qtperiod - Set EAP-Request/Identity quiet time interval
txperiod - Set EAP-Request/Identity retransmission timeout
suptmout - Set EAP-Request retransmission timeout
svrtmout - Set server authentication request timeout
maxreq - Set max number of EAP-Request retransmissions
raperiod - Set reauthentication time interval
reauth - Set reauthentication status to on or off
default - Restore default 802.1x configuration
global - Apply current global 802.1x configuration to this port
cur - Display current 802.1x configuration
Table 6-32 802.1x Port Configuration Menu Options (/cfg/l2/8021x/port)
Command Syntax and Usage
mode force-unauth|auto|force-auth
Sets the type of access control for the port:
force-unauth
- the port is unauthorized unconditionally.
auto
- the port is unauthorized until it is successfully authorized by the RADIUS server.
force-auth
- the port is authorized unconditionally, allowing all traffic.
The default value is force-auth.
qtperiod
<0-65535>
Sets the time, in seconds, the authenticator waits before transmitting an EAP-Request/ Identity
frame to the supplicant (client) after an authentication failure in the previous round of authentica-
tion. The default value is 60 seconds.
frame to the supplicant (client) after an authentication failure in the previous round of authentica-
tion. The default value is 60 seconds.
txperiod
<1-65535>
Sets the time, in seconds, the authenticator waits for an EAP-Response/Identity frame from the
supplicant (client) before retransmitting an EAP-Request/Identity frame. The default value is 30
seconds.
supplicant (client) before retransmitting an EAP-Request/Identity frame. The default value is 30
seconds.
suptmout
<1-65535>
Sets the time, in seconds, the authenticator waits for an EAP-Response packet from the supplicant
(client) before retransmitting the EAP-Request packet from the authentication server. The default
value is 30 seconds.
(client) before retransmitting the EAP-Request packet from the authentication server. The default
value is 30 seconds.