DELL 9.8(0.0) User Manual
Defaults
860, 3260
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.16.0
Introduced on MXL 10/40GbE Switch IO Module.
Usage
Information
Information
You can configure up to 16 target TCP ports on the switch in one command or
multiple commands.
multiple commands.
When you use the no iscsi target port command and the TCP port you wish
to delete is one bound to a specific IP address, the IP address value must be
included in the command.
to delete is one bound to a specific IP address, the IP address value must be
included in the command.
show iscsi
Display the currently configured iSCSI settings.
Syntax
show iscsi
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.16.0
Introduced on MXL 10/40GbE Switch IO Module.
Example
Dell#show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
1020
iSCSI Optimization