DELL 9.8(0.0) User Manual
corresponding to that VRF. This information contains local
updates tied to the VRF that you specify. This command
displays the local LSP debugging details of the current unit.
updates tied to the VRF that you specify. This command
displays the local LSP debugging details of the current unit.
interface
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command
Modes
Modes
EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added support for VRF. Introduced on the S6000-ON.
9.2(0.2)
Introduced on the Z9000.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
6.3.1.0
Introduced.
debug isis snp-packets
To debug IS-IS complete sequence number PDU (CSNP) and partial sequence number PDU (PSNP)
packets, enable debugging on a specific interface and provides diagnostic information.
packets, enable debugging on a specific interface and provides diagnostic information.
S4820T
Syntax
debug isis [vrf vrf-name] snp-packets [interface]
To turn off debugging, use the no debug isis [vrf vrf-name] snp-
packets [interface] command.
To turn off debugging, use the no debug isis [vrf vrf-name] snp-
packets [interface] command.
1032
Intermediate System to Intermediate System (IS-IS)