DELL 9.8(0.0) User Manual

(OPTIONAL) Enter the next-hop address in dotted decimal 
format and enter a mask in either dotted decimal or /prefix 
format.

(OPTIONAL) Enter the name of a prefix list name.

Defaults

weight = 115

Command 
Modes

• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.3.11.1

Introduced on the Z9000.

6.3.1.0

Introduced.

Usage 
Information

The administrative distance indicates the trust value of incoming packets. A low 
administrative distance indicates a high trust rate. A high value indicates a lower 
trust rate. For example, a weight of 255 is interpreted that the routing information 
source is not trustworthy and should be ignored.

distribute-list in

Filter network prefixes received in updates.

S4820T

Syntax

distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-
name in [interface] command.

Parameters

Specify the prefix list to filter prefixes in routing updates.

1038

Intermediate System to Intermediate System (IS-IS)