DELL 9.8(0.0) User Manual
Version
Description
8.3.12.0
Introduced on the S4810.
7.5.1.0
Added support for IPv6 ISIS.
6.3.1.0
Introduced.
Usage
Information
Information
To redistribute a default route (0.0.0.0/0), configure the default-information
originate command.
originate command.
Changing or disabling a keyword in this command does not affect the state of the
other command keywords.
other command keywords.
When an LSP with an internal metric is received, the Dell Networking OS considers
the route cost while considering the advertised cost to reach the destination.
the route cost while considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out
command to ensure that the routes are properly passed to the receiving routing
protocol.
command to ensure that the routes are properly passed to the receiving routing
protocol.
How a metric value assigned to a redistributed route is advertised depends on how
on the configuration of the metric-style command. If the metric-style
command is set for Narrow or Transition mode and the metric value in the
redistribute command is set to a number higher than 63, the metric value
advertised in LSPs is 63. If the metric-style command is set for Wide mode, the
metric value in the redistribute command is advertised.
on the configuration of the metric-style command. If the metric-style
command is set for Narrow or Transition mode and the metric value in the
redistribute command is set to a number higher than 63, the metric value
advertised in LSPs is 63. If the metric-style command is set for Wide mode, the
metric value in the redistribute command is advertised.
Related
Commands
Commands
•
•
— suppresses networks from being advertised in updates. This
command filters redistributed routing information.
redistribute bgp
Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2]
[metric metric-value] [metric-type {external| internal}]
[route-map map-name]
To return to the default values, use the no redistribute bgp command with
the appropriate parameters.
[metric metric-value] [metric-type {external| internal}]
[route-map map-name]
To return to the default values, use the no redistribute bgp command with
the appropriate parameters.
Parameters
AS number
Enter a number that corresponds to the autonomous system
number. The range is from 1 to 65355.
number. The range is from 1 to 65355.
Intermediate System to Intermediate System (IS-IS)
1075