DELL 9.8(0.0) User Manual
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Usage
Information
Information
This command applies to dynamic port-channel interfaces only. When applied on a
static port-channel, this command has no effect.
static port-channel, this command has no effect.
Related
Commands
Commands
lacp port-priority
To influence which ports will be put in Standby mode when there is a hardware limitation that prevents all
compatible ports from aggregating, configure the port priority.
S4820T
Syntax
lacp port-priority priority-value
To return to the default setting, use the no lacp port-priority priority-
value command.
To return to the default setting, use the no lacp port-priority priority-
value command.
Parameters
priority-value
Enter the port-priority value. The higher the value number,
the lower the priority. The range is from 1 to 65535. The
default is 32768.
the lower the priority. The range is from 1 to 65535. The
default is 32768.
Defaults
32768
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
Link Aggregation Control Protocol (LACP)
1099