DELL 9.8(0.0) User Manual
Version
Description
pre-6.2.1.1
Introduced on the E-Series.
show cam mac linecard (dynamic or static)
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
S4820T
Syntax
show cam mac linecard slot port-set port-pipe [address mac_addr
| dynamic | interface interface | static | vlan vlan-id]
| dynamic | interface interface | static | vlan vlan-id]
Parameters
linecard slot
(REQUIRED) Enter the keyword linecard then a slot
number to select the linecard for which to gather
information.
number to select the linecard for which to gather
information.
port-set port-
pipe
pipe
(REQUIRED) Enter the keywords port-set then a Port-Pipe
number to select the Port-Pipe for which to gather
information. The range is from 0 or 1.
number to select the Port-Pipe for which to gather
information. The range is from 0 or 1.
address mac-
addr
addr
(OPTIONAL) Enter the keyword address then a MAC
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
dynamic
(OPTIONAL) Enter the keyword dynamic to display only
those MAC addresses the switch dynamically learns.
those MAC addresses the switch dynamically learns.
interface
interface
interface
(OPTIONAL) Enter the keyword interface then the
interface type, slot and port information:
interface type, slot and port information:
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
static
(OPTIONAL) Enter the keyword static to display only those
MAC addresses specifically configured on the switch.
MAC addresses specifically configured on the switch.
vlan vlan-id
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1
to 4094.
display the MAC address assigned to the VLAN. The range is 1
to 4094.
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1116
Layer 2