DELL 9.8(0.0) User Manual

Version

Description

7.7.1.0

Introduced on the C-Series.

7.5.1.0

Added support for the violate-action and detail
options.

6.5.1.0

Added support for Port Channel.

Example

Dell#show mac learning-limit

Interface Learning Dynamic Static Unknown SA

Slot/port Limit MAC count MAC count Drops

Te 1/1 10 0 0 0

Te 1/2 5 0 0 0

Dell#show mac learning-limit interface tengigabithethernet 1/1

Interface Learning Dynamic Static Unknown SA

Slot/port Limit MAC count MAC count Drops

Te 1/1 10 0 0 0

Virtual LAN (VLAN) Commands

The following commands configure and monitor virtual LANs (VLANs). VLANs are a virtual interface and

use many of the same commands as physical interfaces.
You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP,
ACLs and SNMP are not supported on a VLAN.

Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a VLAN
interface may continually switch between Master and Backup.

NOTE: For more information, refer to

VLAN Stacking

and VLAN-related commands, such as

default vlan-id

Specify a VLAN as the Default VLAN.

S4820T

Syntax

default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the
no default vlan-id vlan-id syntax.