DELL 9.8(0.0) User Manual
advertise med power-via-mdi
To advertise the Extended Power via MDI TLV, configure the system.
S4820T
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
To return to the default, use the no advertise med power-via-mdi command.
Defaults
unconfigured.
Command
Modes
Modes
CONFIGURATION (conf-lldp)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
Usage
Information
Information
Advertise the Extended Power via MDI on all ports that are connected to an 802.3af
powered, LLDP-MED endpoint device.
powered, LLDP-MED endpoint device.
Related
Commands
Commands
— debugs LLDP.
— displays the LLDP neighbors.
advertise med softphone-voice
To advertise softphone to enable IP telephony on a computer so that the computer can be used as a
phone, configure the system.
phone, configure the system.
S4820T
Syntax
advertise med softphone-voice {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
DSCP_value} | {priority-tagged number}
1164
Link Layer Discovery Protocol (LLDP)