DELL 9.8(0.0) User Manual
To return to the default, use the no advertise med voice {vlan-id
layer2_priority DSCP_value} | {priority-tagged number} command.
layer2_priority DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id
Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority
Enter the Layer 2 priority (C-Series and E-Series only). The
range is from 0 to 7.
range is from 0 to 7.
DSCP_value
Enter the DSCP value (C-Series and E-Series only). The range
is from 0 to 63.
is from 0 to 63.
priority-tagged
number
number
Enter the keywords priority-tagged then the Layer 2
priority. The range is from 0 to 7.
priority. The range is from 0 to 7.
Defaults
unconfigured.
Command
Modes
Modes
CONFIGURATION (conf-lldp)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series and E-Series.
Related
Commands
Commands
— debugs LLDP.
— displays the LLDP neighbors.
advertise med voice-signaling
To advertise when voice control packets use a separate network policy than voice data, configure the
system.
system.
S4820T
Syntax
advertise med voice-signaling {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
DSCP_value} | {priority-tagged number}
Link Layer Discovery Protocol (LLDP)
1169