DELL 9.8(0.0) User Manual
Usage
Information
Information
The connect-source option is used to supply a source IP address for the TCP
connection. When an interface is specified using the connect-source option, the
primary configured address on the interface is used.
connection. When an interface is specified using the connect-source option, the
primary configured address on the interface is used.
If the total number of SA messages received from the peer is already larger than the
limit when this command is applied, those SA messages continue to be accepted.
To enforce the limit in such situation, use the clear ip msdp peer command to
reset the peer.
limit when this command is applied, those SA messages continue to be accepted.
To enforce the limit in such situation, use the clear ip msdp peer command to
reset the peer.
Related
Commands
Commands
— clears the MSDP peer.
— displays the MSDP information.
ip msdp redistribute
Filter local PIM SA entries in the SA cache. SAs which the ACL denies time out and are not refreshed. Until
they time out, they continue to reside in the MSDP SA cache.
S4820T
Syntax
ip msdp redistribute [list acl-name]
Parameters
list acl-name
Enter the name of an extended ACL that contains permitted
SAs. If you do not use this option, all local entries are
blocked.
SAs. If you do not use this option, all local entries are
blocked.
Defaults
Not configured.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
Multicast Source Discovery Protocol (MSDP)
1185