DELL 9.8(0.0) User Manual
Parameters
host
Enter the keyword host to set the device-role as host.
router
Enter the keyword router to set the device-role as router.
Defaults
none
Command
Modes
Modes
POLICY LIST CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Z9000 switches.
Related
Commands
•
enter the RA guard policy configuration mode.
•
— Allows you to configure the RA guard related
commands.
hop-limit
Enable the verification of the advertised hop count limit. If this command is not configured, the
verification process is bypassed.
Syntax
hop-limit {maximum | minimum limit}
To reset the hop count limit, use the no hop-limit {maximum | minimum
limit} command.
To reset the hop count limit, use the no hop-limit {maximum | minimum
limit} command.
Parameters
maximum limit
Enter the keyword maximum then the hop limit value. The
range is from 0 to 254.
minimum limit
Enter the keyword minimum then the hop limit value. The
range is from 0 to 254.
Defaults
none
Command
Modes
Modes
POLICY LIST CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1228
Neighbor Discovery Protocol (NDP)