DELL 9.8(0.0) User Manual
•
enter the RA guard policy configuration mode.
other-config-flag
Enable the verification of the advertised other configuration parameter. If this command is not
configured, the verification process is bypassed.
configured, the verification process is bypassed.
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the no other-config-flag
{on | off} command.
To reset the other configuration parameter, use the no other-config-flag
{on | off} command.
Parameters
on
Enter the keyword on to set the other-config-flag value as
ON.
off
Enter the keyword off to set the other-config flag value as
OFF.
Defaults
none
Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Z9000 switches.
Related
Commands
•
— Allows you to configure the RA guard related
commands.
•
guard policy name and enter the RA guard policy configuration mode.
reachable-time
Enable the verification of the configured reachability time in the received RA packets.
Syntax
reachable—time value
To reset the advertised reachability time, use the no reachable-timevalue
command.
To reset the advertised reachability time, use the no reachable-timevalue
command.
Neighbor Discovery Protocol (NDP)
1233