DELL 9.8(0.0) User Manual
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.11.1
Introduced on the Z9000.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Related
Commands
Commands
ip telnet server vrf
Configures the TELNET server on either a specific VRF or a management VRF.
S4820T
Syntax
ip telnet server vrf {management | vrf-name}
To undo the TELNET server configuration, use the no ip telnet server [vrf
vrf-name] command.
To undo the TELNET server configuration, use the no ip telnet server [vrf
vrf-name] command.
Parameters
vrf
management
management
Enter the keyword vrf followed by the keyword
management to specify a management VRF that is used by
the TELNET server.
management to specify a management VRF that is used by
the TELNET server.
vrf vrf-name
Enter the keyword vrf and then the name of the VRF to
specify the VRF that is used by the TELNET server.
specify the VRF that is used by the TELNET server.
Defaults
Disabled
Command
Modes
Modes
CONFIGURATION
124
Control and Monitoring