DELL 9.8(0.0) User Manual
If the state of an object changes back to its former UP/DOWN state before the
timer expires, the timer is cancelled and the client is not notified. For example, if
the DOWN timer is running when an interface goes down and comes back up, the
DOWN timer is cancelled and the client is not notified of the event.
timer expires, the timer is cancelled and the client is not notified. For example, if
the DOWN timer is running when an interface goes down and comes back up, the
DOWN timer is cancelled and the client is not notified of the event.
If the timer expires and an object’s state has changed, a notification is sent to the
client. If no delay is configured, a notification is sent immediately after a change in
the state of a tracked object is detected. The time delay in communicating a state
change is specified in seconds.
client. If no delay is configured, a notification is sent immediately after a change in
the state of a tracked object is detected. The time delay in communicating a state
change is specified in seconds.
Related
Commands
Commands
•
an IPv4 Layer 3 interface.
•
state of a Layer 2 interface.
•
an IPv4 route metric.
•
– configures object tracking on the reachability of an
IPv4 route.
description
Enter a description of a tracked object.
Syntax
description {text}
To remove the description, use the no description {text} command.
To remove the description, use the no description {text} command.
Parameters
text
Enter a description to identify a tracked object (80 characters
maximum).
maximum).
Defaults
none
Command
Modes
Modes
OBJECT TRACKING (conf_track_object-id)
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
8.3.12.0
Introduced on the S4810.
8.4.1.0
Introduced.
Related
Commands
Commands
•
an IPv4 Layer 3 interface.
•
state of a Layer 2 interface.
•
an IPv4 route metric.
1242
Object Tracking