DELL 9.8(0.0) User Manual
no-summary
(OPTIONAL) Enter the keywords no-summary to prevent the
ABR from sending summary Link State Advertisements (LSAs)
into the stub area.
ABR from sending summary Link State Advertisements (LSAs)
into the stub area.
Defaults
Disabled.
Command
Modes
Modes
ROUTER OSPF
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for the Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
Usage
Information
Information
To configure all routers and access servers within a stub, use this command.
Related
Commands
Commands
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
S4820T
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters
ref-bw
(OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
second. The range is from 1 to 4294967. The default is 100
megabits per second.
1264
Open Shortest Path First (OSPFv2 and OSPFv3)