DELL 9.8(0.0) User Manual
• If passive-interface default is specified, then save no passive-
interface interface into the running configuration.
No passive-interface default
• Clear everything and revert to the default behavior.
• All previously marked passive interfaces are removed.
• May update ABR status.
• All previously marked passive interfaces are removed.
• May update ABR status.
On configuring suppression using the passive-interface command, the state of the
OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor
changes to DOWN after the dead-timer expires.
OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor
changes to DOWN after the dead-timer expires.
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
S4820T
Syntax
redistribute {connected | isis | ospf | rip | static} [metric
metric-value | metric-type type-value] [route-map map-name]
[tag tag-value]
To disable redistribution, use the no redistribute {connected | isis |
rip | static} command.
metric-value | metric-type type-value] [route-map map-name]
[tag tag-value]
To disable redistribution, use the no redistribute {connected | isis |
rip | static} command.
Parameters
connected
Enter the keyword connected to specify that information
from active routes on interfaces is redistributed.
from active routes on interfaces is redistributed.
isis
Enter the keyword isis to specify that ISO IS-IS information is
redistributed.
redistributed.
ospf
Enter the keyword ospf to specify that information
corresponding to OSPF is redistributes.
corresponding to OSPF is redistributes.
rip
Enter the keyword rip to specify that RIP routing
information is redistributed.
information is redistributed.
static
Enter the keyword static to specify that information from
static routes is redistributed.
static routes is redistributed.
metric metric-
value
value
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 16777214.
range is from 0 (zero) to 16777214.
metric-type
type-value
type-value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
• 2 = OSPF External type 2
route-map
map-name
map-name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
of the route map.
1298
Open Shortest Path First (OSPFv2 and OSPFv3)