DELL 9.8(0.0) User Manual
Version
Description
pre-6.1.1.1
Introduced on the E-Series.
Usage
Information
Information
The following describes the show ip ospf process-id neighbor command
shown in the following example.
shown in the following example.
Item
Description
Neighbor ID
Displays the neighbor router ID.
Pri
Displays the priority assigned neighbor.
State
Displays the OSPF state of the neighbor.
Dead Time
Displays the expected time until FTOS declares the neighbor
dead.
dead.
Address
Displays the IP address of the neighbor.
Interface
Displays the interface type slot/port information.
Area
Displays the neighbor’s area (process ID).
Example
Dell#show ip ospf 34 neighbor
Neighbor ID Pri State Dead Time Address Interface Area
20.20.20.7 1 FULL/DR 00:00:32 182.10.10.3 Te 1/1 0.0.0.2
192.10.10.2 1 FULL/DR 00:00:37 192.10.10.2 Te 1/2 0.0.0.1
20.20.20.1 1 FULL/DROTHER00:00:36 192.10.10.4 Te 1/3 0.0.0.1
Dell#
show ip ospf routes
Display routes OSPF calculates and stores in OSPF RIB.
S4820T
Syntax
show ip ospf [process-id | vrf vrf-name] routes
Parameters
process-id
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Process ID is entered, command applies only to the first
OSPF process.
vrf vrf-name
Enter the keyword vrf followed by the name of the VRF to
show the OSPF RIB information corresponding to the OSPF
processes that are tied to a specific VRF.
show the OSPF RIB information corresponding to the OSPF
processes that are tied to a specific VRF.
Defaults
none
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
1332
Open Shortest Path First (OSPFv2 and OSPFv3)