DELL 9.8(0.0) User Manual
To disable packet forwarding over multiple paths, use the no maximum-paths
command.
command.
Parameters
number
Specify the number of paths. The range is from 1 to 64. The
default is 8 paths.
default is 8 paths.
Defaults
8
Command
Modes
Modes
ROUTER OSPF
Command
History
History
Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre-6.1.1.1
Introduced on the E-Series.
passive-interface
Disable (suppress) sending routing updates on an interface.
S4820T
Syntax
passive—interface interface
To enable sending routing updates on an interface, use the no passive-
interface interface command.
To enable sending routing updates on an interface, use the no passive-
interface interface command.
Parameters
interface
Enter the following keywords and slot/port or number
information:
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults
Enabled, that is sending of routing updates are enabled by default.
Open Shortest Path First (OSPFv2 and OSPFv3)
1365