DELL 9.8(0.0) User Manual
Sending 5, 100-byte ICMP Echos to 172.31.1.255, timeout is 2
seconds:
Reply to request 1 from 172.31.1.208 0 ms
Reply to request 1 from 172.31.1.216 0 ms
Reply to request 1 from 172.31.1.205 16 ms
::
Reply to request 5 from 172.31.1.209 0 ms
Reply to request 5 from 172.31.1.66 0 ms
Reply to request 5 from 172.31.1.87 0 ms
Dell#
Example (IPv6)
Dell#ping 100::1
Type Ctrl-C to abort.
Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds:
!!!!!
Success rate is 100.0 percent (5/5), round-trip min/avg/max =
0/0/0 (ms)
Dell#
reload
Reboot Dell Networking Operating System (OS).
Syntax
reload [conditional nvram-cfg-change]
Parameters
conditional
nvram-cfg-
change
nvram-cfg-
change
Reload if the condition is true. A configuration change to the
nvram requires a switch reload. To reload the switch, select
nvram-cfg-change.
nvram requires a switch reload. To reload the switch, select
nvram-cfg-change.
Command
Modes
Modes
EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
9.0.0.0
Introduced on the Z9000.
9.1(0.0)
Added ‘conditional’ parameter.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
Control and Monitoring
137