DELL 9.8(0.0) User Manual
hash-mask-
length
length
(OPTIONAL) Enter the hash mask length. The range is from
zero (0) to 32. The default is 30.
zero (0) to 32. The default is 30.
priority
(OPTIONAL) Enter the priority used in Bootstrap election
process. The range is from zero (0) to 255. The default is
zero (0).
process. The range is from zero (0) to 255. The default is
zero (0).
Defaults
Not configured.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added support for VRF. Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
6.1.1.0
Added support for the VLAN interface.
ip pim dr-priority
Change the designated router (DR) priority for the interface.
Syntax
ip pim dr-priority priority-value
To remove the DR priority value assigned, use the no ip pim dr-priority
command.
To remove the DR priority value assigned, use the no ip pim dr-priority
command.
Parameters
priority-value
Enter a number. Preference is given to larger/higher number.
The range is from 0 to 4294967294. The default is 1.
The range is from 0 to 4294967294. The default is 1.
Defaults
1
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
1396
PIM-Sparse Mode (PIM-SM)