DELL 9.8(0.0) User Manual
Version
Description
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Introduced on the C-Series and S-Series.
7.6.1.0
Introduced on the E-Series.
Usage
Information
Information
Do not enter this command before creating the access-list.
ip pim query-interval
Change the frequency of PIM Router-Query messages.
Syntax
ip pim query-interval seconds
To return to the default value, use the no ip pim query-interval seconds
command.
To return to the default value, use the no ip pim query-interval seconds
command.
Parameters
seconds
Enter a number as the number of seconds between router
query messages. The range is from 0 to 65535. The default is
30 seconds.
query messages. The range is from 0 to 65535. The default is
30 seconds.
Defaults
30 seconds
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Introduced on the C-Series for the port-channels and the S-
Series.
Series.
1400
PIM-Sparse Mode (PIM-SM)