DELL 9.8(0.0) User Manual

Version

Description

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.1.1.0

Introduced on the E-Series ExaScale.

7.8.1.0

Introduced on the C-Series for the port-channels and the S-
Series.

7.7.1.1

Introduced

Usage 
Information

This command configures an expiration timer for all S.G entries, unless they are 
assigned to an Extended ACL.
Even though the FHR nodes act as RPs, these nodes still send Register encap 
messages to themselves and expect to receive a Register stop message (for 
Anycast RP support). As a result, if the DLT timer expires, SG is not deleted until the 
register state is deleted in the node. This register state expires 210 seconds after 
the last Null register is received.

ip pim ssm-range

Specify the SSM group range using an access list.

Syntax

ip pim [vrf vrf-name] ssm-range {access_list_name}

Parameters

vrf vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of 
the VRF to specify the SSM group range for that VRF.

NOTE: Applies to specific VRF if input is provided, else 
applies to Default VRF.

Enter the name of the access list.

Defaults

Default SSM range is 232/8 and ff3x/32

Command 
Modes

CONFIGURATION

Command 
History

Version

Description

9.7(0.0)

Introduced on the S6000-ON. Added support for VRF on 
S6000, S4810, S4820T, Z9000, Z9500, and S6000–ON.

9.7(0.0)

Added support for VRF.

9.5(0.1)

Introduced on the Z9500.

1406

PIM-Sparse Mode (PIM-SM)