DELL 9.8(0.0) User Manual
165.87.31.200 Vl 30 v2/S 1 30 1
165.87.31.201
show ip pim neighbor
View PIM neighbors.
S4820T
Syntax
show ip pim [vrf vrf-name] neighbor
Parameters
vrf vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to configure this setting on that VRF.
the VRF to configure this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
applies to Default VRF.
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added support for VRF. Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
8.1.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Introduced on the S-Series.
Usage
Information
Information
The following describes the show ip pim neighbor command shown in the
following example.
following example.
Field
Description
Neighbor address
Displays the IP address of the PIM neighbor.
Interface
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was
found.
(VLAN or Port Channel), on which the PIM neighbor was
found.
1412
PIM-Sparse Mode (PIM-SM)