DELL 9.8(0.0) User Manual
To remove the description, use the no description {description}
command.
command.
Parameters
description
Enter a description to identify the policies (80 characters
maximum).
maximum).
Defaults
none
Command
Modes
Modes
CONFIGURATION (policy-map-input and policy-map-output; conf-qos-policy-in
and conf-qos-policy-out; wred)
and conf-qos-policy-out; wred)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
pre- 7.7.1.0
Introduced.
Related
Commands
Commands
— creates an input QoS-policy on the router.
— creates an output QoS-policy on the router.
match ip access-group
Configure match criteria for a class map, based on the access control list (ACL).
NOTE: IPv6 class-maps and IP-any class-maps do not match. This condition is true for IPv6 and IP-
any class-maps on both ACLs as well as VLANs.
any class-maps on both ACLs as well as VLANs.
S4820T
Syntax
match ip access-group access-group-name [set-ip-dscp value |
set-color value]
set-color value]
1470
Quality of Service (QoS)